How To Replace MacBook Pro 13" Retina Display Late 2012 Logic Board

How To Replace MacBook Pro 13″ Retina Display Late 2012 Logic Board

MacBook Pro 13″ Retina Display Late 2012 Logic Board Replacement:

Introduction: The Apple Service Center in Kolkata is a trustworthy online place where you can repair any kind of Apple device like iPhone, MacBook, iPad, etc.  If you are facing any MacBook or iPhone regarding issues like screen damage, dead battery issues, RAM issues, body damage, motherboard issues, hinge damage or broken, etc. then it’s the time to repair your device or replace the spare parts if required. We provide the Apple device service for all MacBooks, iPad, iPhones, etc. We also provide some information regarding any damage issues that occur on your MacBook and you can fix these issues at home. So, here the question is How To Replace MacBook Pro 13″ Retina Display Late 2012 Logic Board? Here we provide some steps that are the best way to replace your MacBook battery logic board issues.

Tools you can use:

  • MacBook Pro and Air 5-Point Pentalobe Screwdriver
  • Philips #00 Screwdriver
  • T6 Torx Screwdriver
  • Spudgers
  • Tweezers

The following steps of How To Replace MacBook Pro 13″ Retina Display Late 2012 Logic Board:

Step – 1

Lower Case

How To Do MacBook Pro 13" Retina Display Late 2012 Battery Contact Board Replacement

  • Gently remove the ten screws that secure the lower case to upper case:
  1. Two 2.3 mm P5 Pentalobe screws
  2. Eight 3.0 mm P5 Pentalobe screws

Step – 2

MacBook Pro Contact Board Issues

  • Gently pull the lowercase and remove it.
  • Just remove the screws that secure the battery connector board to the logic board:
  1. Two 2.8 mm T6 Torx screws
  2. One 7.0 mm T6 Torx shouldered screw

Step – 3

MacBook Pro Contact Board Damage

  • With the help of tweezers to remove the small plastic cover located near the bottom right of the battery connector board.
  • Then gently remove the wide head 6.4 mm T6 Torx screw that secures the battery connector to the logic board assembly.

Step – 4

MacBook Pro 13" Retina Display Late 2012 Battery Capacity

  • Just lift the battery connector board up off the logic board.

Step – 5

Battery Contact Board

MacBook Issues

  • With the help of tweezers gently grasp the Interposer.
  • Then lift the Interposer off the logic board and remove it.

 

 

 

 

Step – 6

Heat sink assembly

How To Replace MacBook Pro 13" Retina Display Late 2012 Logic Board

  • Gently remove the screws that secure the heat sink to the logic board assembly:
  1. One 2.4 mm Phillips #00 screw
  2. One 3.4 mm T5 Torx screw
  3. Four 2.7 mm T5 Torx screws
  • Then disconnect the I/O board data cable connector from its socket by spudger

Step – 7

MacBook Pro 13" Retina Display Late 2012 Logic Board Replacement

  • Then move the iSight camera cable aside by spudger.
  • Then remove the right and left fan by using the spudger.

Step – 8

MacBook Pro Issues

  • Just pull the display data cable straight out of its socket on the logic board.
  • Pry the headphone jack cable connector up off its socket on the logic board.

Step – 9

MacBook Pro Logic Board Issues

  • Just grasp the plastic pull tab and microphone ribbon cable out of its socket.
  • Grasp the plastic pull tab and pull the keyboard ribbon cable out of its socket.

Step – 10

Replace MacBook Pro 13" Retina Display Late 2012 Logic Board

  • Then trackpad ribbon cable from its socket on the logic board.
  • Just pry the left speaker cable connector up off from its socket on the logic board.

Step – 11

Logic Board

Way To Replace MacBook Pro 13" Retina Display Late 2012 Logic Board

  • Carefully remove the nine 3.3 mm T5 Torx screws securing the logic board and MagSafe DC-in board.
  • The logic board remains by pulling the MagSafe cable connector straight out of its socket on the logic board

 

 

 

Here, we provide complete information about the MacBook Pro. It helps you to fix the logic board related issues at home. For more information visit our Youtube channel. But sometimes it is not easily resolved, in this case, don’t try to fix it at home. At, Apple service center in Kolkata we can resolve any kind of battery contact board related issues at a very affordable cost. We always use the latest technology to repair or fix the problems. With the help of iFixit.

Why choose Apple Service Center Kolkata?

  • Best certified and experienced engineers and technicians hired by the Apple service center.
  • The latest techniques used by us.
  • Free pickup and delivery service.
  • Parts protection and parts warranty for secure service.
  • The great support team for all customer queries.

Frequently Asked Questions:

 

  1. What Kind Of Precautions You Must Take During MacBook Pro 13″ Retina Display Late 2012 Logic Board Replacement?
  • The first and most important thing is you must use globes during this process.
  • Because your MacBook is a delicate device and globes protect it from bacteria, sweating or any other harmful components that is present on your hand.
  • Also, the rubber and plastic material is safe because it protects you from electric shock.
  • Also, gently use the tools like a spudger or screwdriver, so that your device is in better condition after replacement.
  1. What are the important tools needed in the MacBook Pro 13″ Retina Display Late 2012 Logic Board replacement process?

The important tools are:

  • MacBook Pro and Air 5-Point Pentalobe Screwdriver
  • Philips #00 Screwdriver
  • T6 Torx Screwdriver
  • Spudgers
  • Tweezers
  1. How To Tell If MacBook Pro 13″ Retina Display Late 2012 Logic Board Is Bad?

There are so many reasons that your MacBook becomes faulty like factory defect and extensive use, accidentally falls or spills, water damage, etc. And the signs of the bad motherboard are:

  • Power issues and unexpected shutdowns
  • Display and graphics problems
  • Port and component failures
  • Unusual sounds and behaviors

Leave a Reply

Your email address will not be published. Required fields are marked *

Made with in India
error: Content is protected !!

Looking For Your Device Repair?

Just fill out the form and our support team will get back to you right away.